Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Low-Speed EV Assembly Silicone Sealant For Sheet Metal, Glass, Lamps And Plastic Components
Problem | Why Should Different Sealing Positions on the Same Low-Speed EV Not Be Treated with One Application Method?
A low-speed four-wheel electric vehicle may be compact, but its assembly contains several different sealing applications. According to the available product information, the silicone sealant can be used for sheet metal, glass, lamps and plastic components, and these applications involve different substrates and joint structures.
Sheet-metal areas can contain seams, overlaps and corners. Glass applications involve interfaces between the glass and surrounding frame. Lamp assemblies have joints between lamp components, while plastic parts can contain curved surfaces, narrow gaps and different surface conditions.
Therefore, even when products from the same 4C / 5C / 6C series are used on one vehicle, process conditions from one joint should not automatically be copied to another.
The more appropriate approach is to establish a relationship between application position, substrate, joint dimensions, product properties and dispensing process.
Cause | Why Should 4C, 5C and 6C Not Be Compared Only by Their Grade Numbers?
4C, 5C and 6C are all specified as uniform black pastes. Their density at 25°C is 1.5–1.7 g/cm³, and their volatile content at 150°C is 3–4%. However, their hardness, tensile strength, skin-over time and cure rate are not identical.
4C provides 50–60 Shore A hardness and 1.85 MPa tensile strength. 5C provides 65 Shore A hardness and 1.4–1.6 MPa tensile strength. 6C provides 60 Shore A hardness and 1.9–2.0 MPa tensile strength.
For skin-over time, 4C and 5C specify 20–40 minutes, while 6C specifies 20–30 minutes. The cure rate is 1.5–3 mm/24h for 4C and 1.2–3 mm/24h for 5C and 6C.
These parameters describe different aspects of material behavior. The grade numbers therefore should not be interpreted as a simple performance ranking.
Solution | How Can a Sealant Selection Process Be Built for Low-Speed EV Assembly?
The first step is to identify the actual application rather than immediately selecting a grade.
For sheet-metal applications, determine the panel structure, overlap design and joint dimensions. For glass, confirm both the glass and frame surfaces. For lamp assemblies, evaluate the actual lamp joint structure. For plastic components, identify the polymer and surface condition where possible.
After these conditions are understood, compare the hardness, tensile strength, skin-over time and cure rate of 4C, 5C and 6C.
For deeper sealant sections, skin-over time should also be clearly separated from internal curing. A skin-over time of 20–40 or 20–30 minutes does not indicate complete curing throughout the bead.
A practical selection process is:
Application Position → Substrate Identification → Joint Width/Depth → 4C/5C/6C Property Comparison → Sample Application → Cure Management → Actual-Part Verification → Production Process Confirmation
How to Choose | What Application Information Should a B2B Buyer Provide Before Grade Selection?
Instead of asking only which of 4C, 5C or 6C is better, a low-speed EV manufacturer or component buyer should provide information about the actual application.
Useful information includes the application position, substrate type, surface condition, joint width and depth, whether bonding or sealing is the primary function, and required downstream process timing.
Hardness can then be compared at 50–60 / 65 / 60 Shore A, tensile strength at 1.85 / 1.4–1.6 / 1.9–2.0 MPa, and skin-over time at 20–40 minutes for 4C/5C versus 20–30 minutes for 6C.
The final grade should still be verified against the actual substrate and component rather than being selected from one parameter alone.
Application Scenarios | Which Low-Speed EV Assembly Areas Can This Silicone Sealant System Cover?
According to the available product information, the application scope includes vehicle-related uses such as low-speed electric vehicles and the bonding and sealing of sheet metal, glass, lamps and plastic components.
This allows the product system to be presented for applications such as body-panel seams, glass-to-frame interfaces, lamp assembly joints and plastic-component connections.
Each application should still be treated as a separate technical scenario with its own substrate, joint geometry and processing requirements.
The available information does not provide dedicated adhesion data for every metal coating, glass type, lamp material or plastic grade. Actual substrates or assembled components should therefore be verified before volume production where specific material compatibility data is unavailable.
Technical Specifications
|
Property |
4C |
5C |
6C |
|---|---|---|---|
|
Appearance |
Uniform Black Paste |
Uniform Black Paste |
Uniform Black Paste |
|
Density at 25°C |
1.5–1.7 g/cm³ |
1.5–1.7 g/cm³ |
1.5–1.7 g/cm³ |
|
Volatile Content at 150°C |
3–4% |
3–4% |
3–4% |
|
Hardness |
50–60 Shore A |
65 Shore A |
60 Shore A |
|
Tensile Strength |
1.85 MPa |
1.4–1.6 MPa |
1.9–2.0 MPa |
|
Skin-Over Time |
20–40 min |
20–40 min |
20–30 min |
|
Cure Rate |
1.5–3 mm/24h |
1.2–3 mm/24h |
1.2–3 mm/24h |