logo

LSEV Side Window Automotive Rtv Silicone Sealant High Temperature

Place of Origin: China
Brand Name: YT
Certification: ISO9001, Work safety standardization certificate
Model Number: Automotive Adhesive
Minimum Order Quantity: 50 metric tons
Price: Custom Product Production
Delivery Time: Customized production depends on the situation.
Payment Terms: L/C, D/A, D/P, T/T, Western Union
Supply Ability: Custom Product Production
Inquiry Now
Get A Quote
Specifications
Highlight Features

LSEV Side automotive rtv silicone

,

Window automotive rtv silicone

,

high temperature automotive sealant

Product Name:
LSEV Side Window Silicone Sealant
Grade:
4C / 5C / 6C
Density:
1.5–1.7 G/cm³
Hardness:
50–65 Shore A, Depending On Grade
Tensile Strength:
1.4–2.0 MPa, Depending On Grade
Skin-Over Time:
20–40 Min, Depending On Grade
Cure Rate:
1.2–3 Mm/24h, Depending On Grade
Application:
Bonding And Sealing Glass-to-Metal Frame Joints In Low-Speed EVs
Product Description

LSEV Side Window Silicone Sealant for Glass-to-Door-Frame Joint Sealing

 

Problem | Why Is a Visible Bead Along the Glass Edge Not Enough to Evaluate Side-Window Sealing?

 

The side-window area of a Low-Speed Electric Vehicle (LSEV) is affected by the glass profile, door-frame geometry and local assembly gaps. Unlike a simple straight joint, the sealing path can extend across upper edges, side sections and corners where the available application space changes.

Simply seeing sealant along the glass edge does not confirm that the actual connection area has been properly filled.

At upper corners and locally changing gaps, a constant material flow may not match nozzle travel speed. This can create thinner sections, local accumulation or incomplete transitions between adjacent beads.

The inspection should therefore focus on bead continuity, actual joint filling and the relationship between the glass and door-frame geometry.

 

Cause | Why Are Side-Window Corners and Narrow Joints More Likely to Develop Inconsistent Bead Dimensions?

 

Along a straight section, nozzle direction can remain relatively stable. When the application reaches an upper corner, narrow gap or frame transition, nozzle angle, travel speed and distance from the substrate can change.

Without corresponding adjustment in material delivery, the sealant cross-section can also change.

Deeper local joints require additional attention to curing. 4C and 5C specify 20–40 minutes skin-over time, while 6C specifies 20–30 minutes. The cure rate is 1.5–3 mm/24h for 4C and 1.2–3 mm/24h for 5C and 6C.

A formed surface skin therefore does not mean that a deeper sealant section has reached the same curing condition.

 

Solution | How Should 4C, 5C and 6C Be Selected According to Side-Window Glass, Door Frame and Joint Geometry?

 

First identify the actual glass surface and the door-frame material and surface condition. Then measure joint width and depth, including corners and areas where the assembly gap changes.

The three grades can then be compared.

4C provides 50–60 Shore A hardness and 1.85 MPa tensile strength. 5C provides 65 Shore A hardness and 1.4–1.6 MPa tensile strength, while 6C provides 60 Shore A hardness and 1.9–2.0 MPa tensile strength.

Because the grades also differ in skin-over time and cure rate, grade numbers or one mechanical property should not be used as a complete selection criterion.

A practical sequence is:

Glass Surface → Door-Frame Surface → Joint Width/Depth → Corner Geometry → Product Properties → Sample Application → Cure Management → Actual Door Assembly Verification

 

How It Works | How Does Silicone Sealant Form a Continuous Seal Between Side-Window Glass and the Door Frame?

 

Black silicone sealant is applied continuously along the required glass-to-frame interface to fill the actual assembly gap.

Along straight sections, nozzle travel and material delivery should be coordinated to maintain bead continuity. When entering a corner or narrow joint, nozzle direction should follow the actual geometry without creating sudden changes in material distribution.

For deeper sealant sections, downstream assembly timing should consider the specified cure rate rather than treating surface skin formation as complete curing.

The available product information supports glass bonding and sealing applications. However, it does not provide dedicated adhesion data for every door-glass, guide-channel material and frame-surface combination. Actual component verification is therefore appropriate for a specific LSEV design.

 

How to Choose | Which Product Properties Should Be Evaluated for an LSEV Side-Window Sealing Project?

 

For cured hardness, compare 50–60 Shore A for 4C, 65 Shore A for 5C and 60 Shore A for 6C.

For tensile strength, the corresponding values are 1.85 MPa, 1.4–1.6 MPa and 1.9–2.0 MPa.

From a processing perspective, 4C and 5C specify 20–40 minutes skin-over time, while 6C specifies 20–30 minutes. Internal curing should also be considered using the corresponding 1.5–3 mm/24h or 1.2–3 mm/24h cure rates.

Selection should therefore combine the actual glass and frame substrates, joint dimensions, hardness, tensile strength, skin-over time and cure rate, rather than relying on one numerical property.

 

Technical Specifications

 

 

Property

4C

5C

6C

Appearance

Uniform Black Paste

Uniform Black Paste

Uniform Black Paste

Density at 25°C

1.5–1.7 g/cm³

1.5–1.7 g/cm³

1.5–1.7 g/cm³

Volatile Content at 150°C

3–4%

3–4%

3–4%

Hardness

50–60 Shore A

65 Shore A

60 Shore A

Tensile Strength

1.85 MPa

1.4–1.6 MPa

1.9–2.0 MPa

Skin-Over Time

20–40 min

20–40 min

20–30 min

Cure Rate

1.5–3 mm/24h

1.2–3 mm/24h

1.2–3 mm/24h

Related Products
Send An Inquiry