logo

Car Headlamp Silicone Automotive Sealant Silicone Flowable For Joint Bonding

Place of Origin: China
Brand Name: YT
Certification: ISO9001, Work safety standardization certificate
Model Number: Automotive Adhesive
Minimum Order Quantity: 50 metric tons
Price: Custom Product Production
Delivery Time: Customized production depends on the situation.
Payment Terms: L/C, D/A, D/P, T/T, Western Union
Supply Ability: Custom Product Production
Inquiry Now
Get A Quote
Specifications
Highlight Features

car Headlamp Automotive Sealant

,

1.7g/cm3 Automotive Sealant

,

Joint Bonding flowable silicone sealant

Product Name:
LSEV Headlamp Silicone Sealant
Grade:
4C / 5C / 6C
Density:
1.5–1.7 G/cm³
Hardness:
50–65 Shore A, Depending On Grade
Tensile Strength:
1.4–2.0 MPa, Depending On Grade
Skin-Over Time:
20–40 Min, Depending On Grade
Cure Rate:
1.2–3 Mm/24h, Depending On Grade
Application:
Bonding And Sealing Glass-to-Metal Frame Joints In Low-Speed EVs
Product Description

LSEV Headlamp Silicone Sealant For Lens-To-Housing Joint Bonding And Sealing

 

Problem | Why Is a Visible Bead Around the Headlamp Lens Not Enough to Evaluate the Seal?

A headlamp assembly in a Low-Speed Electric Vehicle (LSEV) typically includes a lens, housing and internal components. At the lens-to-housing interface, the sealant needs to create a continuous path around the lamp rather than simply producing a visible exterior bead.

Headlamp geometry is rarely a simple rectangle. Curved edges, corners and changing joint widths can require continuous changes in nozzle direction during application.

If material flow remains constant while nozzle travel slows at a corner, excessive local accumulation can occur. If movement becomes too fast during a directional change, the bead can become thinner or lose continuity.

The key inspection point is therefore continuous filling of the actual lens-to-housing joint, not merely the presence of sealant around the visible perimeter.

Cause | Why Are Headlamp Corners and Complex Profiles More Likely to Produce Changes in Bead Dimensions?

Along a relatively straight housing edge, nozzle distance, angle and travel speed can be controlled more consistently. These conditions change when the nozzle follows a curved profile or corner.

This directly affects the amount of sealant deposited per unit length and the final bead cross-section.

Surface skin formation should also be distinguished from internal curing. 4C and 5C specify 20–40 minutes skin-over time, while 6C specifies 20–30 minutes. The cure rate is 1.5–3 mm/24h for 4C and 1.2–3 mm/24h for 5C and 6C.

Where the lens-to-housing joint contains a deeper sealant section, downstream processing should therefore consider actual bead depth rather than relying only on surface condition.

 

Solution | How Should 4C, 5C and 6C Be Selected for a Headlamp Lens-to-Housing Joint?

 

First identify the actual lens and housing materials and their surface conditions. Then inspect joint width, depth, curved sections and corner geometry around the lamp perimeter.

The documented material properties can then be compared.

4C provides 50–60 Shore A hardness and 1.85 MPa tensile strength. 5C provides 65 Shore A hardness and 1.4–1.6 MPa tensile strength, while 6C provides 60 Shore A hardness and 1.9–2.0 MPa tensile strength.

Because hardness, tensile strength, skin-over time and cure rate represent different characteristics, the grade numbers should not be treated as a simple performance ranking.

A practical selection sequence is:

Lens Material → Housing Material → Joint Width/Depth → Lamp Geometry → 4C/5C/6C Property Comparison → Sample Application → Cure Management → Actual Lamp Assembly Verification

 

How It Works | How Does Silicone Sealant Form a Continuous Seal Between the Headlamp Lens and Housing?

 

Black silicone sealant is continuously dispensed along the connection groove or joint between the lamp lens and housing to fill the actual assembly gap.

Straight sections require coordination between material flow and nozzle travel speed. At curved edges, corners and changing joint widths, nozzle direction should follow the lamp geometry while maintaining bead continuity.

After completing the perimeter, the bead start/end connection should also be inspected. Excess sealant in one section cannot compensate for a discontinuity elsewhere.

For deeper joints, downstream assembly and inspection timing should also consider the specified cure rate.

 

How to Choose | Which Conditions Should Be Confirmed for an LSEV Headlamp Sealing Project?

 

The actual lens and housing materials should be identified first. The available product information supports lamp and plastic-component bonding and sealing, but it does not provide dedicated adhesion-strength data for every specific lens polymer and housing material combination.

Joint geometry should then be evaluated. Where width and depth vary around the lamp perimeter, dispensing conditions and curing requirements may also need to vary.

Finally, compare the hardness, tensile strength, skin-over time and cure rate of 4C, 5C and 6C.

For a specific polymer or lamp material without corresponding adhesion data, verification using the actual production component is more appropriate than making a universal compatibility claim.

 

Technical Specifications

 

 

Property

4C

5C

6C

Appearance

Uniform Black Paste

Uniform Black Paste

Uniform Black Paste

Density at 25°C

1.5–1.7 g/cm³

1.5–1.7 g/cm³

1.5–1.7 g/cm³

Volatile Content at 150°C

3–4%

3–4%

3–4%

Hardness

50–60 Shore A

65 Shore A

60 Shore A

Tensile Strength

1.85 MPa

1.4–1.6 MPa

1.9–2.0 MPa

Skin-Over Time

20–40 min

20–40 min

20–30 min

Cure Rate

1.5–3 mm/24h

1.2–3 mm/24h

1.2–3 mm/24h

Related Products
Send An Inquiry