logo

OEM Automotive Silicone Sealant Clear LSEV Panel Silicone Sealant

Place of Origin: China
Brand Name: YT
Certification: ISO9001, Work safety standardization certificate
Model Number: Automotive Adhesive
Minimum Order Quantity: 50 metric tons
Price: Custom Product Production
Delivery Time: Customized production depends on the situation.
Payment Terms: L/C, D/A, D/P, T/T, Western Union
Supply Ability: Custom Product Production
Inquiry Now
Get A Quote
Specifications
Highlight Features

OEM automotive silicone sealant clear

,

60 ShoreA automotive silicone sealant clear

,

60 ShoreA Panel Silicone Sealant

Product Name:
LSEV Roof-to-Side Panel Silicone Sealant
Grade:
4C / 5C / 6C
Density:
1.5–1.7 G/cm³
Hardness:
50–65 Shore A, Depending On Grade
Tensile Strength:
1.4–2.0 MPa, Depending On Grade
Skin-Over Time:
20–40 Min, Depending On Grade
Cure Rate:
1.2–3 Mm/24h, Depending On Grade
Application:
Bonding And Sealing Tail-Lamp Lens-to-Housing Joints In Low-Speed Electric Vehicles
Product Description

LSEV Roof-To-Side Panel Silicone Sealant For Sheet-Metal Joint Sealing

 

Problem | Why Is Applying One Continuous Bead Not Enough for a Long Roof-to-Side Panel Joint?

 

The connection between the roof panel and side body panel of a Low-Speed Electric Vehicle (LSEV) can form a relatively long sealing path. Compared with a short local joint, the challenge is not simply dispensing sealant from one end to the other.

Long straight sections may transition into curved or angled structures near the front and rear ends of the roof. As joint direction and available dispensing space change, nozzle angle, travel speed and distance from the joint can also change.

A bead may therefore appear continuous on the surface while its actual cross-section varies along the sealing path.

The key control points are long-bead continuity, corner transitions and consistent filling across areas with different joint dimensions.

 

Cause | Why Can Sealant Thickness Vary Along the Same Roof-to-Side Panel Joint?

 

Along a long straight section, nozzle travel speed can be maintained relatively consistently. At front or rear roof corners, local overlaps and structural transitions, nozzle direction needs to change.

If material flow remains unchanged while travel speed decreases, more sealant is deposited per unit length. If travel speed increases suddenly after a corner, a thinner bead can result.

Actual joint depth may also vary along the roof edge. 4C and 5C specify 20–40 minutes skin-over time, while 6C specifies 20–30 minutes. The cure rate is 1.5–3 mm/24h for 4C and 1.2–3 mm/24h for 5C and 6C.

Surface skin formation therefore does not demonstrate that every section of a long joint has reached the same internal curing condition.

 

Solution | How Should 4C, 5C and 6C Be Compared for Roof-to-Side Panel Sheet-Metal Joints?

 

Before selecting a grade, identify the actual roof and side panels and their surface conditions. Joint width and depth should be checked separately at straight sections, corners and local overlaps.

The documented material properties can then be compared.

4C provides 50–60 Shore A hardness and 1.85 MPa tensile strength. 5C provides 65 Shore A hardness and 1.4–1.6 MPa tensile strength, while 6C provides 60 Shore A hardness and 1.9–2.0 MPa tensile strength.

Hardness and tensile strength describe different mechanical characteristics, while skin-over time and cure rate relate to processing and curing. One value alone should therefore not determine the grade.

A practical sequence is:

Roof/Side Panels → Surface Condition → Joint Width and Depth → Corner/Overlap Geometry → 4C/5C/6C Properties → Sample Application → Cure Management → Actual Body Assembly Verification

 

How It Works | How Does Silicone Sealant Form a Continuous Long Bead Between the Roof and Side Panel?

 

Black silicone sealant is continuously dispensed along the connection between the roof panel and side body panel, filling the required joint according to its actual dimensions.

Along long straight sections, material delivery and nozzle travel should remain coordinated. When the bead reaches front or rear corners, curved edges or local overlaps, nozzle direction should follow the actual joint geometry so that the sealant continues to enter the connection area rather than remaining only on the surface.

For a long sealing path, any interruptions and subsequent bead reconnections should also be inspected.

The objective is therefore not simply to increase sealant quantity, but to maintain a continuous filling path across different joint geometries.

 

Application Scenarios | Which Roof-to-Side Panel Connections Can Be Treated as Dedicated Sealing Applications?

 

This application is intended for roof sheet-metal connections in Low-Speed Electric Vehicles (LSEVs), low-speed four-wheel electric vehicles and electric microcars.

Typical locations include long joints between the roof and side body panels, front and rear roof corners, local panel overlaps and transitions from straight to curved sections.

The available product information supports vehicle-body sealing applications, but it does not provide dedicated adhesion data for every metal, coating or surface-treatment combination. Verification using the actual production panels and process conditions is therefore appropriate before volume production.

 

Technical Specifications

 

 

Property

4C

5C

6C

Appearance

Uniform Black Paste

Uniform Black Paste

Uniform Black Paste

Density at 25°C

1.5–1.7 g/cm³

1.5–1.7 g/cm³

1.5–1.7 g/cm³

Volatile Content at 150°C

3–4%

3–4%

3–4%

Hardness

50–60 Shore A

65 Shore A

60 Shore A

Tensile Strength

1.85 MPa

1.4–1.6 MPa

1.9–2.0 MPa

Skin-Over Time

20–40 min

20–40 min

20–30 min

Cure Rate

1.5–3 mm/24h

1.2–3 mm/24h

1.2–3 mm/24h

Related Products
Send An Inquiry