logo

Electric Microcar Window Frame Corner Splice Silicone Automotive Sealant For Sealing

Place of Origin: China
Brand Name: YT
Certification: ISO9001, Work safety standardization certificate
Model Number: Automotive Adhesive
Minimum Order Quantity: 50 metric tons
Price: Custom Product Production
Delivery Time: Customized production depends on the situation.
Payment Terms: L/C, D/A, D/P, T/T, Western Union
Supply Ability: Custom Product Production
Inquiry Now
Get A Quote
Specifications
Highlight Features

2.0 mpa automotive sealant

,

2.0 mpa industrial silicone sealant

Product Name:
Electric Microcar Door Window Frame Silicone Sealant
Grade:
4C / 5C / 6C
Density:
1.5–1.7 G/cm³
Hardness:
50–65 Shore A, Depending On Grade
Tensile Strength:
1.4–2.0 MPa, Depending On Grade
Skin-Over Time:
20–40 Min, Depending On Grade
Cure Rate:
1.2–3 Mm/24h, Depending On Grade
Application:
Bonding And Sealing Tail-Lamp Lens-to-Housing Joints In Low-Speed Electric Vehicles
Product Description

Electric Microcar Door Window Frame Silicone Sealant For Corner And Splice Joint Sealing

 

Problem | Why Are Door Window-Frame Corners More Likely to Develop Discontinuous Sealant Beads Than Long Straight Sections?

 

An electric microcar door window frame normally contains structural sections running in different directions. The side and upper frame sections may be relatively straight, but their connection introduces corners, splice points or local changes in sheet-metal geometry.

If these areas are sealed using exactly the same nozzle speed and material delivery as a long straight section, the bead cross-section can change.

When the nozzle slows to change direction while material flow remains constant, local accumulation can occur. If nozzle movement becomes too fast during the turn, the bead can become thinner.

Door-frame sealing should therefore evaluate continuous filling between straight sections, corners and frame splice points, rather than inspecting only the appearance of the straight bead.

 

Cause | Why Do Window-Frame Splice Points and Narrow Gaps Change the Actual Filling Condition?

 

Straight frame sections usually provide relatively consistent joint dimensions. At splice points and corners, joint width, depth and dispensing angle can change.

When the nozzle enters a narrower area, maintaining the same material flow can concentrate sealant near the surface. Where the actual joint is deeper, internal filling and subsequent curing also require attention.

4C and 5C specify 20–40 minutes skin-over time, while 6C specifies 20–30 minutes. Cure rates are 1.5–3 mm/24h for 4C and 1.2–3 mm/24h for 5C and 6C.

Surface skin formation and internal curing are therefore different stages, particularly where bead depth varies along the window frame.

 

Solution | How Should 4C, 5C and 6C Be Selected According to Window-Frame Joint Dimensions and the Dispensing

Path?

 

Before selecting a grade, inspect the actual door-frame structure and separately measure straight sections, upper corners, splice points and local overlap joints.

The documented properties can then be compared.

4C provides 50–60 Shore A hardness and 1.85 MPa tensile strength. 5C provides 65 Shore A hardness and 1.4–1.6 MPa tensile strength, while 6C provides 60 Shore A hardness and 1.9–2.0 MPa tensile strength.

Where the production process is sensitive to the working period after dispensing, skin-over time should also be considered. For deeper local joints, cure rate should be included when planning downstream operations.

A practical selection sequence is:

Window-Frame Structure → Surface Condition → Straight/Corner Joint Dimensions → Dispensing Path → 4C/5C/6C Properties → Sample Application → Cure Management → Actual Door Assembly Verification

 

How to Choose | Which Parameters and Process Conditions Should Be Confirmed for Door Window-Frame Sealing?

 

Actual joint width and depth should be confirmed first rather than estimated from external appearance.

The material properties should then be compared. All three grades specify a density of 1.5–1.7 g/cm³, while their hardness, tensile strength, skin-over time and cure rate differ.

The 65 Shore A hardness of 5C does not establish that it is superior for every door-frame joint. Likewise, the 1.9–2.0 MPa tensile strength of 6C should not be used as the only selection criterion.

Joint dimensions, dispensing path, hardness, tensile strength, skin-over time and cure rate should be evaluated together and verified using the actual door-frame component.

 

Application Scenarios | Which Door Window-Frame Joints Are Suitable for a Continuous Sealant Bead?

 

This application focuses on metal door window-frame structures in low-speed four-wheel electric vehicles, including upper frame corners, connections between vertical and upper frame sections, local splice joints and sheet-metal overlap areas.

It should be distinguished from a side-window glass sealing application. The primary target here is filling and sealing joints within the door window frame itself, rather than bonding the glass to the frame.

The available product information supports vehicle-body sealing applications, but does not provide dedicated adhesion data for every metal, coating or surface-treatment system. Verification with the actual window-frame component is therefore appropriate.

 

Technical Specifications

 

 

Property

4C

5C

6C

Appearance

Uniform Black Paste

Uniform Black Paste

Uniform Black Paste

Density at 25°C

1.5–1.7 g/cm³

1.5–1.7 g/cm³

1.5–1.7 g/cm³

Volatile Content at 150°C

3–4%

3–4%

3–4%

Hardness

50–60 Shore A

65 Shore A

60 Shore A

Tensile Strength

1.85 MPa

1.4–1.6 MPa

1.9–2.0 MPa

Skin-Over Time

20–40 min

20–40 min

20–30 min

Cure Rate

1.5–3 mm/24h

1.2–3 mm/24h

1.2–3 mm/24h

Related Products
Send An Inquiry