Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
368 Neutral Silicone Weatherproof Sealant for Building Window and Door Joints
Problem
Joints around windows and doors are continuously exposed to dimensional changes caused by temperature differences, substrate movement and normal building service conditions. Typical joint locations include window frame-to-wall interfaces, glazing joints and connections between different construction materials.
Simply filling these gaps is not sufficient. Excessive sagging during application, poor substrate adhesion or unsuitable mechanical properties can affect the continuity and long-term function of the sealed joint.
Cause
Window and door assemblies commonly combine glass, metal frames, cement-based substrates and other materials with different surface and movement characteristics.
Vertical joints also require the uncured sealant to maintain its profile after application. According to the 368 product data, the sealant has a sag value of ≤3 mm, providing a measurable reference for vertical joint application.
Its extrusion rate is ≥150 mL/min, which provides a quantitative indication of application performance during continuous gun dispensing.
Solution
368 Silicone Weatherproof Sealant is a one-component, neutral-curing silicone sealant designed for window and door installation, building joints, glazing and general sealing applications involving various construction materials.
The product data specifies a tack-free time of ≤3 hours, sag of ≤3 mm, and an extrusion rate of ≥150 mL/min.
For mechanical performance, the tensile modulus is >0.4 MPa at 23°C and >0.6 MPa at -20°C. These values provide measurable references when evaluating sealant behavior under different temperature conditions rather than relying only on general descriptions such as “weather resistant” or “flexible.”
The recommended application temperature is 5°C–40°C. Joint surfaces should be cleaned of dust, oil, moisture and other contaminants that may interfere with adhesion before sealant application.
Technical Specifications
|
Property |
Specification |
|---|---|
|
Product Type |
One-component neutral silicone weatherproof sealant |
|
Appearance |
Homogeneous paste |
|
Sag |
≤3 mm |
|
Tack-Free Time |
≤3 h |
|
Extrusion Rate |
≥150 mL/min |
|
Tensile Modulus at 23°C |
>0.4 MPa |
|
Tensile Modulus at -20°C |
>0.6 MPa |
|
Adhesion at Maintained Extension |
No failure |
|
Adhesion after Water Immersion |
No failure |
|
Mass Loss |
≤20% |
|
Recommended Application Temperature |
5°C–40°C |
|
Standard |
JC/T 882-2001 |
|
Packaging |
300 mL cartridge / 590 mL sausage |
How It Works
The sealant is applied continuously into the prepared joint to establish adhesion to both joint surfaces. After curing, it forms a continuous elastomeric sealing layer between the substrates.
The specified ≤3 mm sag is particularly relevant to vertical window and door joints, while the tensile modulus values measured at 23°C and -20°C provide quantitative references for evaluating mechanical behavior at different temperatures.
368 is intended primarily for weather sealing and general building joint applications. It should not automatically be substituted for structural silicone sealants in load-bearing structural glazing systems.
Application Scenarios
Typical applications include perimeter joints between aluminum window frames and walls, general glazing seals, elastic joints between building materials, and general sealing involving metal, wood and cement-based substrates.
For structural bonding, permanently submerged joints or special substrates, project-specific compatibility and application requirements should be verified before use.