Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
368 Silicone Weatherproof Sealant For Aluminum Window Frame And Wall Joints
Problem|Why Do Aluminum Window-to-Wall Joints Require Flexible Sealing?
After aluminum windows are installed, perimeter gaps normally remain between the frame and cement mortar, concrete or other wall substrates. These joints connect materials with different physical properties. Aluminum frames respond to temperature changes differently from surrounding mineral-based wall materials.
When a joint is filled only with rigid material, or when the sealant does not establish sufficient adhesion to the joint surfaces, movement can contribute to local cracking, adhesion loss or discontinuity of the seal. A window perimeter joint therefore requires more than simple gap filling; it needs a continuous sealing layer capable of accommodating normal joint movement.
Cause|Why Do Vertical Application and Surface Preparation Matter?
Window perimeter joints usually include vertical, horizontal and corner sections. On vertical joints, excessive movement of uncured sealant can affect the designed bead profile.
According to the 368 product data, the sealant has a sag value of ≤3 mm, providing a measurable reference for vertical application. Its extrusion rate of ≥150 mL/min also provides a quantitative indicator for continuous gun application.
Surface preparation is equally important. Dust, oil, moisture and loose substrate material can interfere with direct contact between the sealant and the substrate, affecting actual adhesion even when the sealant itself meets its specified properties.
Solution|Creating a Continuous Window Perimeter Seal
368 Silicone Weatherproof Sealant is a one-component, neutral-curing silicone sealant intended for window and door installation and general sealing between construction materials.
The product data specifies a tack-free time of ≤3 hours, sag of ≤3 mm and extrusion rate of ≥150 mL/min. These values provide measurable references for surface skin formation, vertical application and continuous dispensing performance.
Its tensile modulus is specified as >0.4 MPa at 23°C and >0.6 MPa at -20°C, providing quantitative information for evaluating mechanical behavior under different temperature conditions.
The recommended application temperature is 5°C–40°C. Before application, aluminum frames and wall substrates should be cleaned of contaminants that could interfere with adhesion. Compatibility or adhesion testing should be considered when working with specially coated aluminum or other uncertain substrates.
Technical Specifications
|
Property |
Specification |
|---|---|
|
Product Type |
One-component neutral silicone weatherproof sealant |
|
Appearance |
Homogeneous paste |
|
Sag |
≤3 mm |
|
Tack-Free Time |
≤3 h |
|
Extrusion Rate |
≥150 mL/min |
|
Tensile Modulus at 23°C |
>0.4 MPa |
|
Tensile Modulus at -20°C |
>0.6 MPa |
|
Adhesion at Maintained Extension |
No failure |
|
Adhesion after Water Immersion |
No failure |
|
Mass Loss |
≤20% |
|
Recommended Application Temperature |
5°C–40°C |
|
Standard |
JC/T 882-2001 |
|
Packaging |
300 mL cartridge / 590 mL sausage |
How to Choose
For window perimeter joints, first determine whether the application requires general weather sealing or structural bonding. Frame-to-wall perimeter joints primarily require sealing, so substrate adhesion, vertical application behavior and mechanical response under temperature changes should be considered.
For vertical frame joints, sag performance is particularly relevant. For projects involving longer continuous beads, extrusion performance can also be considered when evaluating application efficiency.
368 is intended for weather sealing and general building joints. It should not be treated as a structural silicone simply because it provides adhesion to common construction materials.
Application Scenarios
Typical applications include perimeter joints between aluminum window frames and walls, connections between frames and cement-based substrates, installation gaps around windows and general sealing involving glass, metal, wood and other compatible building materials.
For permanently submerged joints, specially treated substrates or applications requiring structural load transfer, suitability should be evaluated according to the specific project requirements.