Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
368 Neutral Silicone Sealant For Aluminum Window Frame Joints
Problem|Why Do Aluminum Window Frame Joints Need Continuous Sealing?
An aluminum window system consists of profiles, glass and multiple connection points. In addition to perimeter joints between the frame and wall, sealing may also be required around frame connections, corners and glazing areas.
Although these joints are often relatively narrow, discontinuous application, insufficient filling or incomplete adhesion can interrupt the sealing layer. Vertical frame sections and corners are particularly sensitive to application quality because the uncured sealant must maintain a controlled bead profile.
Window fabrication and installation therefore require attention not only to filling the joint, but also to extrusion performance, sag resistance and substrate preparation.
Cause|Why Do Frame Joints Develop Uneven Sealant Beads?
Aluminum window frames contain straight joints, corners and changes in application direction. If gun movement and material output are not properly coordinated, the resulting bead can become uneven or discontinuous.
According to the supplied 368 technical data, the product has an extrusion rate of ≥150 mL/min, providing a measurable reference for continuous gun application. Its sag value of ≤3 mm provides another quantitative reference for vertical joints.
Contamination on aluminum surfaces can also interfere with direct sealant-to-substrate contact. Cleaning the application area is therefore an important part of establishing the adhesion interface.
Solution|Neutral Silicone for Continuous Window Frame Sealing
368 Silicone Weatherproof Sealant is a one-component, neutral-curing silicone sealant intended for window installation, general metal sealing and compatible construction material joints.
The sealant can be continuously applied along prepared frame joints and finished to form a uniform bead. Its specified tack-free time is ≤3 hours, while the extrusion rate is ≥150 mL/min, providing measurable information about surface skin formation and dispensing performance.
For mechanical behavior at different temperatures, the tensile modulus is specified as >0.4 MPa at 23°C and >0.6 MPa at -20°C. The supplied technical information also states no failure in adhesion at maintained extension and no failure after water immersion under the specified test conditions.
The recommended application temperature is 5°C–40°C. Adhesion compatibility should be confirmed when anodized, coated or otherwise specially treated aluminum profiles are involved.
Technical Specifications
|
Property |
Specification |
|---|---|
|
Product Type |
One-Component Neutral Silicone Weatherproof Sealant |
|
Appearance |
Homogeneous Paste |
|
Sag |
≤3 mm |
|
Tack-Free Time |
≤3 h |
|
Extrusion Rate |
≥150 mL/min |
|
Tensile Modulus at 23°C |
>0.4 MPa |
|
Tensile Modulus at -20°C |
>0.6 MPa |
|
Adhesion at Maintained Extension |
No Failure |
|
Adhesion after Water Immersion |
No Failure |
|
Mass Loss |
≤20% |
|
Recommended Application Temperature |
5°C–40°C |
|
Standard |
JC/T 882-2001 |
|
Packaging |
300 mL Cartridge / 590 mL Sausage |
How It Works
After application into the prepared aluminum frame joint, the sealant establishes contact with both sides of the joint. As the neutral silicone cures, it forms a continuous elastomeric sealing layer.
In practical window fabrication, bead continuity is more important than simply applying additional material. Excess sealant in one area cannot compensate for a discontinuity at a corner or profile connection.
The specified ≤3 mm sag provides a reference for vertical bead stability, while the ≥150 mL/min extrusion rate provides a measurable indication of dispensing performance during continuous application.
Application Scenarios
368 can be used for aluminum window frame joints, window perimeter connections, general glazing seals and other compatible metal-to-building-material joints within its intended application range.
For window fabrication, it can be used for general non-structural assembly and joint sealing. On construction sites, it can be applied to perimeter and related building joints.
Where the joint is designed to transfer structural glazing loads or other structural forces, an appropriate structural silicone should be selected according to the engineering design requirements.