Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
Epoxy Die Attach Adhesive | One-Component Heat-Curing Conductive Silver Epoxy for IC and LED Bonding with Ionic Content Data for Material Assessment
Product Positioning
This one-component, heat-curing conductive silver epoxy is intended for bonding and securing automotive-grade IC and LED chips. Sodium and chloride ion content data, together with their extraction conditions, support material assessment alongside electrical conductivity, thermal conductivity and curing requirements.
Specifications
Item | Document specification | Typical value or test conditions |
|---|---|---|
Material system | Conductive silver epoxy | One-component, heat-curing |
Sodium ion content | <15 ppm | Ion chromatography; water extraction at 100°C for 24 h |
Chloride ion content | <10 ppm | Ion chromatography; water extraction at 180°C for 2 h |
Thermal conductivity | Approximately 8 W/(m·K) | Typical value: 8 W/(m·K), laser flash method |
Volume resistivity | <2 × 10⁻⁴ Ω·cm | Typical value: 1.0 × 10⁻⁴ Ω·cm, standard curing conditions |
Die shear at 25°C | 10.0 kgf | Typical value: 10.2 kgf; 2 mm × 2 mm, Si-Ag |
Viscosity | 8,500–11,000 cP | Typical value: 10,000 cP; 5 rpm, spindle No. 51 |
Recommended cure | — | 175°C for 1.0 hour |
Thawing | — | 60–90 minutes at room temperature, syringe upright |
Use after thawing | — | Recommended use within 36 hours at 23°C and 50% RH |
Storage and shelf life | — | Original packaging at ≤−40°C; six months from manufacture |
Problem | Why Check Ionic Content When Selecting a Die Attach Adhesive?
IC and LED die attachment projects may specify ionic content limits in addition to bonding, electrical and thermal requirements. General descriptions such as low moisture absorption or good reliability do not establish compliance with those limits. Buyers need the individual test results and conditions.
Cause | Results from Different Extraction Conditions Are Not Directly Comparable
Sodium ion content is <15 ppm after water extraction at 100°C for 24 hours. Chloride ion content is <10 ppm after water extraction at 180°C for two hours. These results use different conditions. They should not be added together as total ionic content or directly ranked against results obtained by other methods.
Solution | Check Material and Process Requirements Individually
During procurement assessment, identify each relevant ion, its limit and the required test method before checking supplier data. Keep bonding surfaces clean and follow the thawing instructions before trials. The recommended cure is 175°C for one hour. Assess material data together with actual bonding results rather than inferring device life from an individual ionic value.
Application | Die Attachment with Defined Material Requirements
The documented application is bonding automotive-grade IC and LED chips. Where electrical conduction is required, the typical volume resistivity of 1.0 × 10⁻⁴ Ω·cm provides a reference. Specific die, substrate and package combinations require confirmation. The application statement does not establish automotive certification.
How to Choose | Assess Ionic Content and Moisture Absorption Separately
Ionic content is a measured result under specified conditions. Low moisture absorption is a qualitative feature in the document, without a reported absorption value. Neither replaces the other. Determine whether the project requires ionic testing, moisture absorption testing or environmental testing, and obtain the corresponding data.
FAQ | Do Two Ionic Results Establish Overall Cleanliness?
Can the product be described as halogen-free?
No. Chloride ion content is not equivalent to total chlorine or total halogen content. The document provides no basis for a halogen-free classification.
Do these results establish corrosion resistance?
No. Relevant corrosion test results are not provided. Ionic data should be used only within their stated testing scope.