Quick Link
Quick Contact
Address
No. 1707, Industrial Road, Tangshan Town, Huantai County, Zibo City, Shandong Province
Tel
86-533-17860959591
Our Newsletter
Subscribe to our newsletter for discounts and more.
LED Die Attach Adhesive | One-Component Conductive Silver Epoxy For Chip Attachment With Electrical And Thermal Data For Material Selection
Product Positioning
This one-component, heat-curing conductive silver epoxy is documented for bonding and securing automotive-grade IC and LED chips. This description focuses on LED die attachment, distinguishing electrical conductivity, thermal conductivity and bonding requirements without extending material data into complete package performance claims.
Specifications
|
Item |
Document specification |
Typical value or conditions |
|---|---|---|
|
Material system |
Conductive silver epoxy |
One-component, heat-curing |
|
Appearance |
Silver |
Silver |
|
Volume resistivity |
<2 × 10⁻⁴ Ω·cm |
1.0 × 10⁻⁴ Ω·cm; standard curing conditions |
|
Thermal conductivity |
Approximately 8 W/(m·K) |
8 W/(m·K); laser flash method |
|
Die shear at 25°C |
10.0 kgf |
10.2 kgf; 2 mm × 2 mm, Si-Ag |
|
Die shear at 160°C |
1.5 kgf |
1.5 kgf; 2 mm × 2 mm, Si-Ag |
|
Viscosity |
8,500–11,000 cP |
10,000 cP; 5 rpm, spindle No. 51 |
|
Thixotropic index |
4.0–5.0 |
4.5; 0.5 rpm / 5 rpm |
|
Recommended cure |
— |
175°C for 1.0 hour |
|
Use after thawing |
— |
Recommended use within 36 hours at 23°C and 50% RH |
|
Packaging |
— |
5 cc or 10 cc |
|
Storage and shelf life |
— |
Original packaging at ≤−40°C; six months from manufacture |
Problem | Why Is Thermal Conductivity Alone Insufficient for LED Adhesive Selection?
LED die attachment requires confirmation that the bonding location permits electrical conduction. Where electrical insulation is required, thermal conductivity data do not justify using conductive silver adhesive. Similar product descriptions do not establish interchangeable electrical functions.
Cause | Electrical and Thermal Conductivity Describe Different Properties
The typical volume resistivity is 1.0 × 10⁻⁴ Ω·cm, while typical thermal conductivity is 8 W/(m·K). The former describes electrical conduction; the latter describes heat transfer. Neither independently establishes device resistance, temperature rise or service life. The actual bonded structure must also be assessed.
Solution | Confirm Electrical Requirements Before Dispensing and Curing Trials
First confirm the electrical connection requirements of the die and mounting surface. Then assess adhesive coverage and bonding performance using samples. The recommended cure is 175°C for one hour, subject to chip and substrate compatibility. Dispensing quantity, needle selection and die placement conditions are unspecified, so universal settings cannot be assigned.
Application | Stay Within the Documented Die Attachment Scope
The documented application is attachment of automotive-grade LED and IC chips. This does not establish suitability for lens, cover or lamp housing sealing. Thermal conductivity data also do not establish optical transparency or waterproof performance of a complete lamp.
How to Choose | Which Conditions Should Remain Attached to Comparisons?
Retain curing conditions when comparing volume resistivity. Retain specimen dimensions, substrates and test temperature when comparing bonding results. The typical die shear value of 10.2 kgf at 25°C applies to the stated 2 mm × 2 mm, Si-Ag conditions. It should not be directly used for load calculations in different structures.
FAQ | What Are Common Misinterpretations in LED Applications?
Does the silver appearance establish reflective performance?
No. The document specifies colour but provides no reflectance or optical test results.
Does thermal conductivity establish a reduction in junction temperature?
No direct claim can be made. No junction-temperature measurements or comparative results for a specific LED structure are provided.