logo

ISO9001 Heat Curing Conductive Silver Electronic Epoxy Adhesive For Bonding

Place of Origin: China
Brand Name: YT
Certification: ISO9001, Work safety standardization certificate
Model Number: Epoxy Adhesive
Inquiry Now
Get A Quote
Specifications
Highlight Features

bonding epoxy adhesive

,

epoxy adhesive iso9001

,

curing conductive silver epoxy

Product Name:
Epoxy Die Attach Adhesive For Chip Attachment
Material System:
One-component Conductive Silver Epoxy
Component And Cure:
One-component, Heat-curing
Typical Thermal Conductivity:
8 W/(m·K)
Typical Volume Resistivity:
1.0 × 10⁻⁴ Ω·cm
Typical Die Shear At 25°C:
10.2 Kgf; 2 Mm × 2 Mm, Si-Ag
Recommended Curing Schedule:
175°C For 1.0 Hour
Application:
Bonding And Securing Automotive-grade IC And LED Chips
Product Description

 
Epoxy Die Attach Adhesive | One-Component Heat-Curing Conductive Silver Epoxy For IC And LED Attachment With Packaging And Frozen-Storage Planning
 
Product Positioning
 
This one-component, heat-curing conductive silver epoxy is intended for bonding and securing automotive-grade IC and LED chips. It is available in 5 cc and 10 cc packages. Purchasing decisions should consider package capacity, frozen storage in the original packaging and consumption after thawing to match material preparation with actual production demand.
 
Specifications
 

Item

Document specification or requirement

Typical value or conditions

Material system

Conductive silver epoxy

One-component, heat-curing

Package capacity

5 cc or 10 cc

Available according to requirements

Storage

Original packaging at ≤−40°C

Incorrect storage affects application and cured properties

Shelf life

Six months from manufacture

Use beyond expiry requires satisfactory testing

Thawing time

60–90 minutes at room temperature

Keep the syringe upright

Use after thawing

Recommended use within 36 hours

23°C, 50% RH

Freeze–thaw requirements

Repeated freezing and thawing is not permitted

Use promptly on equipment after thawing

Density

3.4–3.8 g/cm³

Typical value: 3.6 g/cm³

Thermal conductivity

Approximately 8 W/(m·K)

Typical value: 8 W/(m·K)

Volume resistivity

<2 × 10⁻⁴ Ω·cm

Typical value: 1.0 × 10⁻⁴ Ω·cm

Recommended cure

—

175°C for 1.0 hour

 
Problem | Is a Larger Package Always Better for Continuous Production?
 
Package selection should reflect actual adhesive consumption after thawing. If the quantity prepared exceeds production demand, remaining material cannot be treated as indefinitely usable simply because the original shelf-life date has not passed. Repeated freezing and thawing must not be used to extend usability.
 
Cause | Shelf Life and the Working Period Apply to Different Conditions
 
The document specifies a six-month shelf life from manufacture in the original packaging at ≤−40°C. After thawing, recommended use is within 36 hours at 23°C and 50% RH. These periods apply to different material states. Original-package shelf life cannot be transferred directly to thawed adhesive.
 
Solution | Record Material Preparation Times and Select Packages by Consumption
 
Estimate consumption from the production schedule before choosing 5 cc or 10 cc packaging. Record the batch, removal time, thaw completion and start of equipment use. Keep the syringe upright during room-temperature thawing for 60–90 minutes, then use promptly. Do not repeatedly freeze and thaw the adhesive.
 
Application | Material Preparation for Die Attachment
 
The documented application is attachment of automotive-grade IC and LED chips. Material preparation should align with dispensing, die placement and the recommended cure of 175°C for one hour. No allowable delay after die placement is specified. The 36-hour working period must not be interpreted as a permitted pre-cure waiting time after placement.
 
How to Choose | Check Storage Compatibility Before Purchasing
 
Confirm that available equipment can maintain the original packaging at ≤−40°C, then select capacity according to consumption. Check manufacturing dates and storage records upon receipt. If a temperature excursion occurs, obtain technical guidance rather than assuming that the full shelf life remains valid.
 
FAQ | How Should Expired or Remaining Material Be Assessed?
 
Must material be discarded immediately after expiry?
The document permits continued use after satisfactory testing, but does not define the tests. Appearance alone is insufficient.

Does the document support extended room-temperature transport?
No. Transport temperature and permitted duration are unspecified and require separate confirmation.

Related Products
Send An Inquiry